CBBFZ - PLMO9-2X, SINGLE ELEMENT PLASMA SOLUTION (SUP DAT)
- MSDS: CBBFZ
- Manufacturer: SPEX INDUSTRIES INC
- Product Name: PLMO9-2X, SINGLE ELEMENT PLASMA SOLUTION (SUP DAT)
- National Stock Number: 6850-00N020545
Product Identification
Product ID:PLMO9-2X, SINGLE ELEMENT PLASMA SOLUTION (SUP DAT)
MSDS Date:01/28/1991
FSC:6850
NIIN:00N020545
MSDS Number: CBBFZ
Responsible Party
EDISON, NJ 08820
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 201-549-7144
Cage: 07977
Contractor
Telephone: 732-549-7144
Cage: 07977
Ingredients
MOLYBDIC ACID, DIAMMONIUM SALT
CAS: 13106-76-8
RTECS: QA4900000
Fraction By Weight: 0.3-3.0%
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 97-99%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:LD50 (ORAL RAT): 333 MG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: THIS SOLN MAY BE HARMFUL IF
INHALED, INGESTED/CONTACTED W/SKIN/EYES. OVEREXP TO MOLYBDENUM
CMPDS MAY RSLT IN GOUT. JOINT PAINS IN KNEES, HANDS, & FEET MAY
OCCUR. ARTICULAR DEFORMITIES, ERYTHEMA , & EDEMA OF JOINTS OFTEN
RESULTS. SERUM URIC ACID LEVELS MAY INCR FROM OVEREXP TO
MOLYBDENUM.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MINUTES OCCASIONALLY
LIFTING UPPER & LOWER EYELIDS. SKIN: REMOVE CONTAMINATED CLOTHING,
THEN FLUSH W/WATER FOR AT LEAST 15 MINUTES. WASH CLOTHING THORO
BEFORE REUSE . INHAL: MOVE TO FRESH AIR. INGEST: DO NOT INDUCE
VOMITING. GET IMMEDIATE MEDICAL HELP. ONLY PATIENT IS CONSCIOUS,
GIVE LARGE QUANTITIES OF MILK/WATER. IF IRRITATION CONTINUES, GET
MED ATTN IMMED.
Fire Fighting
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:VENTILATE AREA. WIPE UP AND PUT INTO A SEALED
CONTAINER FOR PROPER DISPOSAL. WASH SPILL SITE OFF WITH WATER AFTER
MATERIAL PICK UP IS COMPLETE. WEAR CHEMICAL RESISTANT GLASSES,
GLOVES AND CLOTHING. WE AR NIOSH/MSHA APPROVED RESPIRATOR.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE AT ROOM TEMPERATURE. KEEP
TIGHTLY SEALED WHEN NOT IN USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:CHEMICAL FUME HOOD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:LAB COAT. EMERGENCY EYEWASH & DELUGE SHOWER
MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
TRADE NAME/PART #: STANDARD, 1,000 PPM MOLYBDENUM IN WATER.
Chemical Properties
Spec Gravity:APPROX 1
Solubility in Water:SOLUBLE
Appearance and Odor:TRANSPARENT, WITHOUT AN ODOR
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WILL RELEASE TOXIC NITROGEN OXIDE AND
AMMONIA FUMES AND VAPORS.
Disposal
Waste Disposal Methods:CONTACT LOCAL HAZARDOUS OR CHEMICAL WASTE
DISPOSAL AGENCY FOR REGULATIONS. DISPOSE OF IN ACCORDANCE W/LOCAL,
STATE & FEDERAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.